DIY: How To Hang Art With Trojan Tools

Over the years as I've traveled to different places I've limited my gimmicky souvenir purchases which ironically are mostly made in China and I've never even been to China! Instead I look for handmade items from the markets or local streets to buy direct from the people who make it.

On our honeymoon in the USA last year we came home with three beautiful artworks all representing special memories of our travels. This black and white sketch of Bourbon Street in New Orleans we picked up from the artist himself at the local market and he even wrote a message for us on the back - you can't get a more personalized souvenir than that!

This art needed to be framed and luckily it was an easy size to frame myself so I hit the shops and found an inexpensive frame at Kmart with a simple black frame and white matting for a professional look.

Mr P and I are experienced art hangers now and have become a lot quicker at this DIY task compared to how long it took us to hang our first gallery wall of black and white photos.

Once you have your art hanging technique right there's no stopping the different arrangements you can create - centered arrangements, gallery photo walls, gallery art walls, the possibilities are endless!

But of course you need to have the right tools for the job too. Being a home DIYer I'm a fan of Trojan Tools which are an Australian brand of tools found on the shelves at Bunnings and marketed towards home improvement and DIY enthusiasts. I've used their renovating tools before and was more than happy to receive some tools needed to hang art at home like a pro.

To hang art you need - A tape measure, level, pencil, hammer or drill

Then you can use - A nail, wall plug, screw or hook

I decided to hang the framed art in our recently renovated powder room just off the laundry which was in need of some finishing touches.

The framed art may have stayed in this spot for a couple of months before we hung it on the wall just to be sure we had found the right home for it .... Does anyone else take months to decide where to hang art or is it just me?

A step by step on how you can hang art

Firstly, you need to decide where to hang your art - hold the frame up and play around with different positions until you find the one you like. As this is a small room, it looked best to center the art on the wall. 

Another tip when it comes to finding the height for hanging art is at eye level, otherwise it can come off looking too high or too low. We went with Mr P's eye level because I am a short-ass!

Use a tape measure to find the center of the wall and mark the center with a pencil.

Next use a tape measure to measure the frame and find out where the center is and mark the center of the frame with a pencil.

Hold the frame against the wall in the position where you want to hang it and use your pencil to mark the center point on the wall.

We used a small level to check the frame was straight and then a large level to draw a straight line.

Now this next part is something we learnt from previous mistakes to do - otherwise your picture will not hang in the exact spot you want it to!

If you have hanging wire on the back of the frame you need to hook your tape measure into the wire and pull towards the top of the frame and measure the distance between the top of the frame and the wire. Likewise if it's a hook on the back of the frame you need to do the same thing and measure the distance from the hook to the top of the frame - this frame had a hook.

Measure on the wall again adding in the measurement between the hook/wire and frame and this new X marks the spot is where you need to drill the hole and hang the hook.

Bear in mind the nail, screw or hook needs to be the correct weight to support the frame.

We use both screws and hooks depending on the type of frame or art we are hanging - nails don't go through our brick walls so that's not an option for us. 

As we have brick walls we used a drill to drill a hole and then a hammer to drive a plug in.

Then we used a drill again to drive a screw into the plug.

A tip to keep the dust from going everywhere when you're drilling is to hold a dustpan underneath to collect the dust - then you don't have anything to clean up!

I have myself a very handy hubby he can work a drill and clean at the same time!!

Once your hook (or screw in our case) is in you're ready to hang your art on the wall.

With one final check of the level, place it on top of the frame, to check that it's straight and then stand back and admire your handy work.

There you have it - in less than half an hour we have hung our art just like a professional!

It's so nice to have some personality on the walls and something interesting to look at - the powder room can be quite a boring place otherwise!

It's so nice to be reminded of our travels to New Orleans with this gorgeous piece of NOLA art on our wall at home.

Do you take months to decide where to hang art? Or is it just me!

Sharing with link parties:

Curly Crafty Mom - The Creative Corner
The Dedicated House - Make It Pretty Monday
Savvy Southern Style - Wow Us Wednesdays
The Plumbette - Home Improvement Thursday

Disclosure: Thanks very much to Trojan Tools for providing some Trojan tools for review. I have not received any payment or compensation for this review. As always, all opinions are my own.

For exclusive extras and daily updates ... follow Jarrah Jungle on Facebook, Instagram and Twitter

[All images my own]