DIY: How To Make A Wheelie Bin Screen

Our local council supplies us with 3 big wheelie bins for general rubbish, recycling and garden waste and we keep them at the front of the house in the driveway.

The bins don't make the best first impression to our visitors who walk past them on their way to our front door plus they take up space in the driveway where we want to park our cars.

So when we designed our front courtyard we included in the design putting the bins in the corner of the courtyard so they are out of the way. Having 3 bins all lined up was still pretty unsightly so we decided to make this wheelie bin screen in front of them to hide them from sight.

The finished timber look wheelie bin screen 

Initially I wanted a screen made from decorative privacy screens but because of the patterns you would still be able to see the bins through them and the screens and a frame would cost over $400.

So then we had the bright idea of making a screen from the Alitimber metal fence slats which we used on the courtyard fence. This would mean the screen will blend in with the fence behind as it's made from the same product, plus we could make little to no gap between the slats so the bins were hidden properly and we had a few lengths leftover so the cost would be less.

The pack of metal fence slats, support posts, inside channels, caps and cement cost us about $300. The other items needed for this DIY is a circular saw, tape measure, level, drill and screws.

DIY: How to make a wheelie bin screen

First things first we worked out how long we wanted the screen to be to fit the 3 bins. Then Mr P cemented a support post into the ground on one side and attached the other support post to the exterior brick wall of the house.

Next we fitted an inside channel to the middle of the support poles with a few screws and used a level to make sure it was straight. The inside channel is what you screw the metal fence slats to. 

Once the two support posts were in place we waited until after the courtyard had been paved before making the screen otherwise it would be in the way of the guys laying the limestone pavers.

This may have taken us almost a year to get around to finishing but as the saying goes Rome was not built in a day! Renovating takes time as well but we get there in the end!!

So over the weekend Mr P got out the circular saw, measured the distance between the support poles and cut the metal fence slats to size.

Using the level again to make sure it was straight Mr P attached the fence slat with screws into the channel in the support pole. Working from the top to the bottom once the first slat is in and straight then the rest are easy to install. We didn't want a big space between the slats or you'd be able to see through the screen so we used a 2mm spacer so there was only a very small gap.

A cap is placed on the top of each support pole to stop any water getting in and then it was done.

Now all 3 wheelie bins sit behind the screen out of sight. The screen also hides the reticulation controls and power supply.

We now have our entire driveway to make use of for parking the cars and it just looks so much nicer at the front of the house without the big green wheelie bins in the way!

This was a great DIY weekend project to tick off the to do list and in fact is the last project to tackle in our front courtyard garden - it is now officially done and we can sit outside in our outdoor oasis and enjoy what we've created.

Where do you store your outdoor rubbish bins?

Sharing with link parties:
Curly Crafty Mom - Motivational Monday
Savvy Southern Style - Wow Us Wednesdays

For exclusive extras and daily updates ... follow Jarrah Jungle on Facebook, Instagram and Twitter

[All images my own]

Pin It Now!

My 'It's A Girl' Baby Shower!

Today I want to share with you my Baby Shower which was thrown a few weeks ago to celebrate my baby bump and to get ready to welcome Mr P and I's new addition as we're just weeks away from starting our own little family.

I wore a flower crown because when else will I have an excuse to wear one! It was made by a talented local The Flower Crown Cartel and it made me feel every bit the glowing Mum-To-Be. When I eventually (and reluctantly!) took the flower crown off I dried the flowers out and it's become a pretty dried flower crown which I've hung in the baby's nursery (more to come on the nursery tour soon!).

The Baby Shower was a combined effort by my two beautiful bridesmaids who impressed everyone with their Hen Party planning for my Wedding that when they offered to throw me a Baby Shower I was very grateful and happy to accept!

My two friends did the invitations, decorations, games and were the hostess with the hostess on the day which meant I could relax and socialise with all the guests which really made the whole day so much more enjoyable for me.

We had the Baby Shower at my house out on the newly built deck and the girls decorated it beautifully with a pink, black and white theme with bunting, balloons and paper pompoms it looked so pretty.

I made a dozen or so flower arrangements with a few bunches of pink and white flowers from my favourite florists on Beaufort Street in Mount Lawley. I recycled the jars from my engagement party and replaced the ribbons with pink, black and white ribbons to match the theme.

I placed the flowers on the tables out on the deck and by the front door and they looked so pretty.

My lovely Mum made all the food for afternoon tea - little finger sandwiches, quiches, fritata, sausage rolls and for the dessert table this was a combined effort I made cupcakes, my Mum made slice and my Auntie made a cake and biscuits.

I gave my camera to a friend to take photos on the day so I didn't need to worry about it and she did a great job at capturing all the happy snaps (including the odd selfie per below!).

Friends and family traveled near and far to make my Baby Shower and I especially love that my 90 year old Nanna (and cruise ship companion!) rang the morning of the party saying she just didn't want to miss it and organised for a 4 hour round trip from the Country to come to the party and I'm so glad she did.

I was showered with gifts from friends and family and feeling ever so grateful for all the thoughtfulness and love our little one will have when she enters this world.

I have hosted two Baby Showers for friends and family and it really is a special occasion to celebrate.

Did you have a Baby Shower?

Sharing with link parties:
Curly Crafty Mom - The Creative Corner
Savvy Southern Style - Wow Us Wednesdays

For exclusive extras and daily updates ... follow Jarrah Jungle on Facebook, Instagram and Twitter

[All images my own]

Pin It Now!

DIY: Painting + Sealing The Driveway

We have come a long way in updating our house exterior over the years - here's a flashback to what our driveway looked like before when we first bought the house.

After we had a new driveway laid it was a million times better and safer to drive and walk on .... Plus we built a garage, rendered and painted the bricks, roof restoration, built a courtyard garden, sheesh we've made some changes out here!

But we were a bit slack and didn't seal the new driveway straight away and so it has faded a bit in the harsh summer sun and suffered a bit of wear and tear. So we thought we had better seal it to protect it from the weather and any stains and marks from leaking cars and also to inject a bit of colour back into it by using a sealer tinted with colour.

We used a Crommelin Sealer in Enhance Satin with a Basalt colour additive which tinted the sealer a dark charcoal colour. This is an industrial strength sealer which resists oil and grease so is perfect for the driveway. 

We sealed one side of the driveway and then on our next free weekend (a month or so later!) we did the other side of the driveway. This way we could still park our cars and walk on one side whilst the painted side was curing.

To seal a driveway you need to clean the surface well first and for this we used our pressure cleaner to hose off the driveway and scrubbed off any heavy marks and stains. When it was dry we went over it with the vacuum to remove any bits of sand left behind. Once it was nice and clean it was ready to be sealed. 

To apply the sealer which is like a thick paint Mr P used a paint brush to cut in along the edges and then a paint roller on a pole to paint the rest. We bought a cheap brush and roller so we could throw them in the bin afterwards. We did two coats leaving it to dry overnight between coats.

We spent under $100 on the sealer, paint brush and roller which makes it a pretty inexpensive DIY.

Painting and sealing the driveway has added a new lease of life to the concrete and it makes a great first impression to the front of the house.

Have you tackled any DIY projects around the house lately?

Sharing with link parties:
Curly Crafty Mom - The Creative Corner
Savvy Southern Style - Wow Us Wednesdays
The Dedicated House - Make It Pretty Mondays

For exclusive extras and daily updates ... follow Jarrah Jungle on Facebook, Instagram and Twitter

[All images my own]

Pin It Now!

DIY: How To Oil A Timber Deck With Cabot's Aquadeck

I'm thrilled to work with Cabot's again, an Australian company, that is known for their quality wood oil and stain products on our new deck and patio project.

We tried Cabot's exterior stain to stain our new treated pine patio in 'new jarrah' and today I'm sharing a DIY on how to oil a timber deck using Cabot's Aquadeck.

For our new deck we decided to use an exterior oil instead of a stain because we love the look of the Merbau timber and want to enhance the natural look of the timber which is what an oil does and to protect it from the weather and elements and also from general wear and tear.

You need to leave new wood to settle for a few weeks before oiling it (its best to check the manufacturers directions for this) - our Merbau timber was out in the weather for over 6 weeks before we oiled it.

To oil a new timber deck that hasn't been oiled before this is what we used:

• Cleaning products - 
• Cabot's Deck Clean 
• Applied with Cabot's Deck Prep brush and Cabot's Deck Hand Bucket
• A pressure cleaner hose and a vacuum 
• Oil - 
• Cabot's Aquadeck in 'Natural' 
• Applied with a paint brush and Cabot's Decking Oil Applicator with the Cabot's Deck Hand Bucket

DIY: How to oil a timber deck

1. Pick the oil - We chose Aquadeck in 'Natural' as we want to enhance the look of our Merbau timber and the Aquadeck applies a clear protective coating to the timber but it doesn't stain or change the colour.

2. Clean the deck - Preparation is the key to a successful DIY so make sure the wood surface is clean of any dirt.

We pressure cleaned the deck with our trusty Karcher High Pressure Cleaner which you attach the hose to.

Then we gave the deck a scrub clean - you need to use proper cleaning products suitable to wood and we used Cabot's Deck Clean and applied it with the Cabot's Deck Prep which was a scrubbing brush on a pole and great for getting marks off the timber.

The Cabot's Deck Hand Bucket is really handy as it shows you how far to fill the deck clean too and then how far to top it up with water so no measuring required.

After we cleaned the deck we left it overnight to ensure it was completely dry.

Lastly, we went over it with the vacuum to ensure it was clean and ready to be oiled. We have a Karcher wet/dry vacuum which we use just for our renovations so we don't dirty or damage our inside vacuum.

3. Oil the deck - It's really important that the deck is dry before you oil it so we waited 24 hours before applying the first coat of oil just to be sure it was completely dry.

Give the oil a really good stir with a stick and then decanter some into a bucket - we used the Cabot's Deck Hand Bucket as it fits the applicators perfectly and was easy to move around the deck.

To apply the oil we used a large flat paint brush to apply the oil all around the edges of the deck just as you would 'cut in' when you paint a room.

Then to apply the oil to the rest of the deck we used a Cabot's Decking Oil Applicator which is a lambs wool applicator on a pole and perfect for flat surfaces for the main areas of the deck. Dip the applicator into the oil and push flat to remove any excess as you don't want to apply the oil too thickly or it will take forever to dry.

Start from the far corner and move down in long even strokes aiming to cover 3-4 boards at a time, work slowly to ensure good coverage and no streaks are left behind.

4. First coat - The first coat of oil took about 1.5 hours to apply on a 10 meter long deck. The oil was a nice consistency and good to work with soaking into the timber and giving even coverage. It has a sheen to it which helps you see where you've applied the oil too and it has a very light brown pigment in it but is mostly transparent and once applied it evens out the colour of the wood to make all the wood look consistent.

5. Second coat - It is dry enough to re-coat after 2 hours however we left it for 24 hours as it was still a bit sticky and tacky. The second coat took the same time to apply about 1.5 hours, after first cutting in with a brush and then applying with an applicator for the rest of the deck. We used a new lambs wool applicator for the second coat.

6. Drying time - It takes a week to cure completely although you can walk on it lightly we kept off it until the 7 days were up to ensure it was completely dry and set so it wouldn't mark or scratch. The weather and temperature has a lot to do with the drying time and as Perth had a cooler change in temperatures and our deck is covered and not in direct sunlight it was still a bit tacky after the first week and so we left it a total of 2 weeks to cure before we moved any furniture onto it.

7. Coverage & Maintenance - A 10 ltr tin of oil did 2 coats with enough leftover for re-oiling down the track. The deck will need to be oiled every 1-2 years. Our deck is completely undercover of the patio so we may not need to re-oil it as often as it's protected from the elements.

Cabot's have a Deck Wash which you can use between oiling to remove any build up and debris which will be what we will do next time rather than oil it again too soon.

8. Clean up - The oil is water based which makes clean up really easy just wash the brush out with water. We didn't keep the lambswool applicators we threw them after use. I prefer to use water based products as there's little to no smell and clean up is easy without the use of chemicals or cleaning products.

And that is an easy weekend project of oiling and protecting a timber deck to enhance the natural timber and protect from wear and tear and the weather.

The new deck and patio space looks amazing I can't wait to set it up with our outdoor furniture and BBQ and enjoy our outdoor entertaining space.


Sharing with link parties:
Curly Crafty Mom - The Creative Corner
Savvy Southern Style - Wow Us Wednesdays
The Dedicated House - Make It Pretty Mondays


Disclosure: Thanks to Cabot's for providing me with the oil products for review. I have not received any payment or compensation. As always, all opinions are my own.

For exclusive extras and daily updates ... follow Jarrah Jungle on Facebook, Instagram and Twitter

[All images my own]

Pin It Now!

DIY: How To Stain A Pine Patio In 7 Easy Steps With Cabot's

I am thrilled to work with Cabot's an Australian company known for their quality wood oil and stain products on our new deck and patio project.

We tried their exterior product range for oiling our new timber deck and staining our new pine patio which I'll share in two separate blog posts.

So what is the difference between a stain and an oil ?

If you like the look of the timber and just want to protect it you use an oil - this is what we are using for our timber deck as its made from beautiful Merbau timber and we want to enhance the natural look of the timber and protect it. With an oil you paint it on and it absorbs in and drys like a clear coating so your natural timber can shine through in all its glory.

Whereas if you don't particularly like the look of the timber and want to change it to a different colour then you use a stain - this is what we are using for our treated pine patio because we don't like the look of pine and want to stain it a darker colour to match the Merbau timber deck.

What do you need to stain a pine patio ?

You don't need a lot for this DIY which keeps the cost down considerably, all you need is the stain, a paint brush, buckets and drop sheets that's it!

• Stain - We used Cabots Deck and Exterior Stain (water based) in 'New Jarrah'
• Paint brush - A wide angled brush works best for painting around framework
• Small bucket - To decanter stain into and keep refilling as you work
• Large bucket - Filled with water to wash brushes when finished
• Drop sheets - To protect work area

How to stain a treated pine patio in 7 easy steps

1. Pick a colour - Once we decided to use a stain we had to pick a stain colour and narrowed it down to two colours New Jarrah and Marbau. We painted the stain onto some treated pine off-cuts to see which one we liked the best and the New Jarrah has a nice red tint to it whereas the Merbau was a bit too brown so we went with the New Jarrah. Besides how can I call my blog namesake Jarrah Jungle and not pick jarrah!

2. Get the site ready - Before you start be aware you need to leave new wood to settle for a few weeks before staining its best to check the manufacturers directions for this (our pine was out in the weather for over 4 weeks before we stained it). Make sure the woods surface is clean of any dirt or dust before you start, we used rags to wipe the pine clean. Put down drop sheets to protect the ground from any drips (in our case our beautiful new deck!) and you are good to go. We worked from a scaffold which made it so much easier and safer to access the patio from that height.

3. Get the stain ready - Give the stain a good stir with a stick and then decanter a small amount into a bucket to work from. Put the lid back on the stain to keep the air out so it stays in good condition. Keep refilling the bucket with stain as you need to.

4. Paint it on - Pick up your paint brush and start painting the stain on using long fluid strokes. Remember if you leave a blob of stain and come back a minute later it will dry like that blob because the stain absorbs into the wood. So clean up any drips and blobs as you go with the paint brush.

5. First coat - The first coat always takes the longest - it took us 10 hours to paint a 10 meter long patio with ceiling frame work and side poles. The stain absorbed quickly into the pine and it was really good to work with and gave great coverage. A 4 ltr tin of stain did the first coat.

6. Second coat - It is dry enough for re-coat after 2 hours however after 10 hours of staining spread over the weekend we didn't get around to doing the second coat until a few days later. The second coat always goes on a lot quicker than the first, uses less product, and best of all it took us half the time.  We used about 3 ltrs on the second coat.

7. Clean up - The stain is water based which makes clean up really easy just wash your brushes out with water. This is why I always prefer to use water based products - there's little to no smell and clean up is so easy without the use of chemicals or cleaning products.

And that my friends is how in 7 easy steps you can turn a treated pine patio

into a more expensive looking timber patio !

I am so happy with how it's turned out all thanks to Mr P who worked like a trooper in the hot summer heat to get the patio stained and ready for the carpenter to finish it off by installing the roof sheeting and new fence.

Coming up next I'll be writing a blog post on How to oil a timber deck using Cabot's exterior products.

What would you like to stain at home ... Outdoor furniture? A deck? Something else!


Sharing with link parties:
Curly Crafty Mom - The Creative Corner
The Dedicated House - Make It Pretty Monday
Savvy Southern Style - Wow Us Wednesdays


Disclosure: Thanks to Cabot's for providing me with these stain products for review. I have not received any payment or compensation. As always, all opinions are my own.

For exclusive extras and daily updates ... follow Jarrah Jungle on Facebook, Instagram and Twitter

[All images my own]

Pin It Now!